Sharp AR-650 - Manual (Page 69)

65
USING THE EDITING FUNCTIONS
4
3 Specify the area of the original.
. Key in the value X1 using the digital keys and
press the upper SET key. If you key in a
wrong value, press the RESET key.
. Values X2, Y1 and Y2 require the same
procedure as X1.
Press the lower SET key.
5 Select the desired copy size, exposure,
reproduction ratio and copy quantity.
Place the original on the glass face down
with the bottom toward you and the left
side centered against the original scale.
6
7 Press the START key.
. Trimmed or masked copies exit from the
copier.