Sharp AR-650 User Manual
Page 24
20
Copying in the Continuous Feed Mode
2. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (Cont.)
1
5
Press the PROGRAM key on the display
panel.
. The menu on the right appears.
Select the desired copy size, reproduction
ratio, exposure and copy quantity.
. The automatic paper selection mode is set
as the default mode.
4
Place the originals on the original feed tray.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60
Ledger : 30
Legal
: 35
2
Press the ADF key.
. The document feeder menu on the right
appears.
Press the ADF key on the panel to select
continuous feed.
. The ADF key is highlighted and set as the
default feed mode.
. The display panel returns to the original
display.
Press the START key.
. The originals are fed starting with the
lowermost one, copied and then exit onto the
original exit area.
Holder
Slides
6
3