Sharp AR-650 - Manual (Page 112)

108
1. NAMES OF THE MAIN COMPONENTS
There are 2 types of optional finishers (AR-FN8 and
AR-FN9).
Functions available differ depending on the type of
the finisher installed.
• Press the key on the basic screen on the right
(shaded), and confirm the finishing modes on the
panel.
* The touch panel used in this chapter appears
when the optional finisher (AR-FN9, with the hole
punching unit) is installed in your copier.
Trays
Front Cover
Upper Cover
Saddle Stitching Tray
(AR-FN9 only)
Lower Cover
Hole Punching Unit
(optional)