Sharp AR-650 - Manual (Page 153)

149
WHEN THE GRAPHIC SYMBOLS FLASH
When a paper misfeed occurs in the optional
finisher or hole punching unit, the MISFEED
symbol flashes and this message appears:
Misfeed in finisher
Press HELP
Remove the misfed paper as described below.
1
6. FINISHER/HOLE PUNCHING UNIT MISFEED SYMBOL
Raise the paper guide and remove the
misfed paper.
Paper guide
Lift the release lever and move the finisher
away from the copier.
2
3
Remove the paper misfed between the
finisher and the copier.
. Perform step 4 to 5 when the optional hole
punching unit is installed.