Bypass copying – Sharp AR-650 User Manual
Page 52
48
12. BYPASS COPYING
The bypass copying mode is convenient in the following instances:
• when the size of any of the paper cassettes installed in the copier is not that which you
require.
• when you want to use a special type of paper such as OHP film.
1
Place the original(s) on the original feed
tray or on the glass.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
2
Select the desired exposure and
reproduction ratio.
Slides