Sony MZ-R910 - Manual (Page 106)

106
MZ-R910.3-234-699-01(1)
To cancel labeling in
the letter input area. Press CANCEL.
1) Functions of the buttons and control may differ
depending on where the cursor is in the letter
input area or the character palette.
2) If phrases are stored in the name bank, the
first phrase stored appears in the display
(page 107).
7 Repeat step 6, and then enter all
characters of the label name.
8 Press down the jog dial for 2 seconds or more.
The disc is labeled.
On the remote control
1 Insert a disc.
See step 1 of “On the recorder” to check the
varieties of name you can label (page 105).
2 Press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until “EDIT”
flashes in the display, and then press x
to enter.
4 Turn the control repeatedly until the
following item appears in the display,
and then press x to enter.
When labeling a track: “ : Name”
When labeling a group: “GP: Name”
When labeling a disc: “ : Name”
5 Turn the control repeatedly to select a
letter and press x to enter.
The selected letter stops flashing and the
cursor moves to the next input position.
Functions Operation
To switch between
katakana, capital letters,
small letters, numbers/
symbols and phrases
1) .
Press X
To move the cursor to
the left or right. Pull and turn the
control (VOL +/–).
To change the letter to
the one before/next one. Turn the control
(./N>).
To insert a blank space
to type in a new letter. Press DISPLAY.
To cancel labeling. Press DISPLAY
for 2 seconds or
more.
2 While the recorder is stopped, press the
jog dial.
3 Turn the jog dial until “EDIT” flashes in
the display, and then press to enter.
4 Turn the dial until the following item
appears in the display, and then press to
enter.
When labeling a track: “ : Name”
When labeling a group: “ : Name”
When labeling a disc: “ : Name”
The cursor flashes in the letter input area
and the track, group, or disc is ready to
be labeled.
5 Press x.
The cursor shifts from the letter input
area to the character palette.
6 Select a letter with the 5-way control key
and press N to enter.
The selected letter appears in the letter
input area and the cursor moves to the
next input position.
The buttons used for character input and
their functions are listed below.
Functions 1) Operations
To move the cursor in
the character palette.
To select a character in
the letter input area.
To enter a letter.
To enter a name.
To move the cursor from
the letter input area to
the character palette.
To move the cursor
from the character
palette to the letter
input area.
To insert a blank space
before the cursor in the
letter input area.
To delete a letter in the
letter input area.
To display “:”, “–” and
“/” repeatedly at the
input position in the
letter input area.
5-way control key.
Turn the jog dial
(move the cursor
upward or
downward)
2) .
Turn the jog dial.
Press N.
Press the jog dial.
Press VOLUME –.
Press x.
Press CANCEL.
Press N or the
jog dial for 2
second or more.
Press VOLUME +.
Press T MARK.
02.4.30, 11:34 AM 106