Sony MZ-R910 - Manual (Page 109)

109
Operating Instructions
MZ-R910.3-234-699-01(1)
Searching for a phrase by its first
letter
On the recorder
1 Follow steps 1 to 5 of “Labeling
recordings” (pages 105 and 106).
A track, group or disc is ready to be
labeled.
2 Turn the jog dial until the letter which
the desired phrase begins with.
3 END SEARCH to search so that the
phrase corresponding to the letter
appears.
4 Press x to move the cursor from the
letter input area to the character palette.
5 Turn the jog dial until the desired phrase
flashes in the display and then press the
jog dial.
The phrase is selected and lights up in
the letter input area.
6 Press the jog dial for 2 seconds or more.
The selected phrase is retrieved.
7 If you continue labeling operation, do
steps 5 to 8 of “Labeling recordings”
(page 106).
On the remote control
1 Follow steps 1 to 5 “On the remote
control” in “Labeling recordings” (pages
106 and 107).
2 When labeling a track, group, or disc,
turn the control repeatedly until the
letter which the desired phrase begins
with flashes in the display.
3 Press X repeatedly to search so that the
phrase corresponding to the letter
appears.
When the letter appears, turn the control
towards N> until the desired phrase
appear one by one.
4 Press x while the phrase you want is
shown in the display.
5 Press x for 2 seconds or more.
6 If you continue labeling operation, do
steps 5 to 7 of “On the remote control”
in “Labeling recordings” (pages 106 and
107).
• Searching for a phrase by its first
letter:
You can retrieve a phrase by its first
letter, and then use the phrase in a new
label.
Searching for a phrase by
displaying the stored phrase
On the recorder
1 Follow steps 1 and 4 of “Labeling
recordings” (pages 105 and 106).
A track, group or disc is ready to be
labeled.
2 Press END SEARCH so that the phrase
stored in the recorder’s memory appears
in the display.
3 Press x to move the cursor from the
letter input area to the character palette.
4 Turn the jog dial until the desired phrase
flashes in the display.
Turning the jog dial causes the phrases
stored in the recorder’s memory to
appear one by one in sequential order.
5 Press the jog dial while the phrase you
want flashes in the display.
The phrase is selected and lights up in
the letter input area.
6 Press the jog dial for 2 seconds or more.
The phrase is retrieved.
7 If you continue labeling operation, do
steps 5 to 8 of “Labeling recordings”
(page 106).
On the remote control
1 Follow steps 1 to 4 “On the remote
control” in “Labeling recordings” (page
106).
2 Press X repeatedly until the phrase
stored in the recorder’s memory appears
in the display.
3 Turn the control repeatedly.
Turning the control causes the phrases
stored in the recorder’s memory to
appear one by one.
4 Press x slightly while the phrase you
want is shown in the display.
5 If you continue labeling operation, do
steps 6 to 7 of “On the remote control”
in “Labeling recordings” (page 107).
02.4.30, 11:34 AM 109