Environmental requirements – Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 User Manual
Page 24
8
|
CHAPTER 2 – ADDITIONAL DETAILS FOR INSTALLING YOUR INTERACTIVE
WHITEBOARD SYSTEM
Environmental Requirements
Before installing your SMART Board 600i4 or D600i4 interactive whiteboard system,
review the following environmental requirements.
CAUTION
•
Do not operate this unit immediately after moving it from a cold location
to a warm location. When the unit is exposed to such a change in
temperature, moisture can condense on the lens and crucial internal parts.
Allow the system to stabilize to room temperature before operation to prevent
possible damage to the unit.
•
In a high altitude location over 6000' (1829 m), where the air is thin and
cooling efficiency is reduced, use the projector with the fan mode set to High.
•
Do not place the unit in hot locations, such as near heating equipment.
Doing so could cause a malfunction and shorten the life of the projector.
IMPORTANT
Using the SMART UF65 or SMART UF65w projector system near a TV or radio
could cause interference to the images or sound. If this happens, move the TV or
radio away from the projector.