Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 - Manual (Page 27)

11 | CHAPTER 2 – ADDITIONAL DETAILS FOR INSTALLING YOUR INTERACTIVE
WHITEBOARD SYSTEM
Routing the Cables
When connecting cables from the SMART UF65 projector to SMART Board 660, 680
and D680 interactive whiteboards, make sure that all cables pass along the top
of your SMART Board interactive whiteboard’s wall-mounting bracket, and then down
the right side of your interactive whiteboard.
When connecting cables from the SMART UF65w projector to a SMART Board 685 or
D685 interactive whiteboard, make sure that all cables pass between the two SMART
Board interactive whiteboard wall-mounting brackets. Space your wall-mounting
brackets’ innermost screw holes 4 inches (10.2 centimeters) apart to provide full
support for your interactive whiteboard’s weight.
NOTE
Don’t connect the power cable to a power outlet until you’ve connected all the
cables to the projector and ECP.
Cable Routing for SMART Board
685 or D685 Interactive
Whiteboards
Cable Routing for SMART Board
660, 680 and D680 Interactive
Whiteboards