Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 - Manual (Page 78)

62 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Password Settings
This menu provides a security function, allowing an administrator to manage projector
use and enable the Administrator Password function.
NOTES
•
The first time you use the password settings, the default password value
is four numbers, for example, 1234.
• The maximum allowable password length is four numbers or letters.
• If you forget the projector password, refer to Retrieving Your Password on
page 76.
Outgoing SMTP server Defines the Simple Mail Transfer Protocol (SMTP)
server.
Username Defines the SMTP server user name.
Password Defines the SMTP server password.
Alert Condition Sends e-mail alerts whenever Lamp Warning,
Low Lamp Life, Temperature Warning and
Fan Lock conditions occur. Select the settings you
want, and then press Submit.
NOTE
The projector sends an alert e-mail (SMART
Alert) to your e-mail address. Press E-mail Alert
Test to confirm your e-mail address by sending a
test e-mail (SMART Alert-Test Mail).
Submenu Setting Description
Password Access Web Management for the first time by
pressing the Enable button and entering a
password. When the password function is
enabled, the administrator password is required to
access Web Management. Select Disable to turn
the projector on without a password.
Submenu Setting Description