Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 - Manual (Page 73)

57 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Display Mode Adjusts the display output to SMART Presentation,
Bright Room, Dark Room, sRGB and User modes
so you can project images from various sources with
consistent color performance:
• SMART Presentation is recommended for color
fidelity.
• Bright Room and Dark Room are recommended
for locations with those conditions.
• sRGB provides standardized accurate color.
• User enables you to apply your own settings.
Brightness Adjusts projector brightness from 0 to 100.
Contrast Adjusts the difference between the lightest and
darkest parts of the image from 0 to 100.
Frequency Adjusts the display data frequency of the projected
image from -5 to 5 to match the frequency of your
computer’s graphics card.
Tracking Synchronizes your projector’s display timing with your
computer’s graphics card from 0 to 63.
Sharpness Adjusts the projected image’s sharpness from 0 to 31.
White Peaking Adjusts the image color brightness from 0 to 10 while
providing more vibrant white shades. A value closer to
0 creates a natural image and a value closer to 10
enhances brightness.
Degamma Adjusts the color performance of the display from
0 to 3.
Color Adjusts the Red, Green, Blue, Cyan, Magenta and
Yellow colors on the projector from 0 to 100 to provide
custom color and luminance output. Each color has a
default value of 100. Adjustments to the color settings
register to the User mode.
Auto Signal Detect Enables or disables signal searching of input
connectors.
• Select On to have the projector continuously switch
inputs until it finds an active video source.
• Select Off to maintain signal detection in one input.
Submenu Setting Description