Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 - Manual (Page 40)

24 | CHAPTER 3 – USING YOUR INTERACTIVE WHITEBOARD SYSTEM
Adjusting Projector Settings
The remote control’s Menu button enables you to access the on-screen display
to adjust the projector settings.
NOTES
•
There are no projector menu options on the ECP. Keep your remote control
in a safe place because the ECP is not meant to substitute for the remote
control.
• The menu heading at the top of all settings is SMART UF65 Settings or
SMART UF65w Settings.
Menu Options
7 (Power) Turn on or turn off the projector
8 (Enter) Accept the selected mode or option
9 (Volume Up) Increase the volume
10 (Volume Down) Decrease the volume
Menu
Heading
Settings Description
Image
Adjustment Display
Mode Indicates the projector’s display output
(SMART Presentation, Bright Room, Dark Room,
sRGB and User).
Brightness Adjusts projector brightness from 0 to 100.
Contrast Adjusts the difference between the lightest and
darkest parts of the image from 0 to 100.
Frequency Adjusts the display data frequency of the projected
image from -5 to 5 to match the frequency of your
computer’s graphics card. The default is 0. Applies to
VGA inputs only.
Tracking Synchronizes your projector’s display timing with your
computer’s graphics card from 0 to 63. Applies to VGA
inputs only.
Number Function Description