Smart Technologies Smart Board Interactive Whiteboard Systems 600i4 - Manual (Page 64)

48 | CHAPTER 4 – REMOTELY MANAGING YOUR INTERACTIVE WHITEBOARD
SYSTEM
Additional Composite Video Source Controls
Your composite video source supports all the general source controls described on
the previous page, as well as the commands listed in this section. These settings are
unavailable when the projector is off, or when the composite video source is
disconnected.
NOTE
Some of these commands are invalid with VGA video sources.
Composite Video Source Information Commands
These commands inform you of the current composite video source settings.
Composite Video Source Control Commands
These commands control the appearance of your composite video source. See
page 42
for setting absolute and adjustment commands.
Command Response
get saturation saturation=[current saturation setting]
get tint tint=[current tint setting]
get sharpness sharpness=[current sharpness setting]
Command Command Target Range Response
set saturation [value] =0 to =100 saturation=[value]
set tint [value] =0 to =100 tint=[value]
set sharpness [value] =0 to =31 sharpness=[value]