13 operation – Samson 5476 User Manual
Page 13
Select datapoint for times-of-use.
Display:
Activate editing mode for times-of-use.
Display: 1–7
Select period/day for which the times-of-use are to be
valid:
1–7 = Monday to Sunday
1–5 = Monday to Friday
6–7 = Saturday to Sunday
1 = Monday, 2 = Tuesday, …, 7 = Sunday
Activate editing mode for period/day.
Display: START;
blinks.
Edit start time (steps of 30 minutes).
Confirm start time. Display: STOP
Edit stop time (steps of 30 minutes).
Confirm stop time. Display: START
The second time-of-use is set like the first time-of-use.
To set the times-of-use for each day, repeat the instructions in the fields highlighted in gray.
Exit the datapoint for times-of-use.
Return to the operating level.
Note!
Do not use the 1–7 , 1–5 und 6–7 menus to check the programmed times-of-use. On opening
this period, the times-of-use are reset to their default settings.
Note!
The controller automatically returns to the operating level if the keys are left unpressed for five
minutes.
EB 5476 EN
13
Operation
0 1 2
3 4
5
6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
0 1 2
3 4
5
6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
START
0 1
1
2
3 4
5
6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24