Samson 5476 - Manual (Page 68)

Functions WE Configuration
Modem operation OFF
8 bit
30 min
5 min
5 min
PULS
– FB44 = ON
8 bit/16 bit
Cyclical initialization In* / 0 to 255 min
Dialing pause to GLT PA* / 0 to 255 min
Modem timeout t
0
* / 0 to 99 min
Dial procedure / PULS/ton
Phone no. of control station GLT*
Alternative recipient OFF
5
– FB46
Number of dialing attempts An* / 0 to 99
Phone number of alternative recipient*
Lock dial-up OFF FB35
Dial-up also upon corrected error OFF FB45
Parameters * WE Range of values
Station address (ST-NO) 255 1 to 247 ( 8 bit)
1 to 999 (16 bit)
Baud rate (BAUD) 9600 150 to 9600
* –> Section 9.3 (”Description of communication parameters to be adjusted“)
9.2 Controller with serial RS-485 interface
A constant bus connection is required (data cable) for the operation of the controller with serial
RS-485 interface. The bus line links the control units/devices in an open ring. At the end of the
bus line, the data cable is connected to the control station using an RS-485/RS-232 converter
(e.g. TROVIS 5484).
The maximum range of the bus connection (cable length) is 1,200 meters. A maximum of
32 devices can be connected to such a segment.
68
EB 5476 EN
Communication
Fig. 7 · Pin assignment of RS-232 port (left) and RS-485 port (right)