Samson 5476 - Manual (Page 14)

1.6.1 Entering public holidays
On public holidays, the times-of-use specified for Sunday apply. A maximum of 20 public holi-
days may be entered.
The public holidays are set in the parameter level.
Set the function block FB6 = ON to make the programmed public holidays also apply to the
DHW heating.
Parameter WE Range of value
Public holidays – Configurable as required
Proceed as follows: Switch to the parameter level.
Display: Time,
blinks
Select datapoint for public holidays.
Display:
Open data point for public holidays.
If applicable, select – – – –.
Activate editing mode for public holiday.
blinks.
Edit public holiday.
Confirm public holiday.
To enter additional public holidays, re-select – – – – (between 31.12 and 01.01) and repeat the
steps in the fields highlighted in gray.
Return to the operating level.
Note!
Public holidays that are not assigned to a specific date should be deleted by the end of the year
so that they are not carried on into the following year.
Deleting a public holiday:
Select the holiday you wish to delete in the datapoint for public holidays.
Confirm selection.
Select – – – – .
Delete the public holiday.
14
EB 5476 EN
Operation
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24