Konica Minolta 7013 - Manual (Page 105)

Advanced features
4 Depending on if you have already entered at least one number into the
blocked numbers list, the
LCD shows one of the following:
or
5 If you want to modify an existing entry in the blocked numbers list, press
or
until you see the number you want to modify.
… or …
If you want to enter a new number in an already-started blocked numbers
list, press
or until you find an empty position in the list.
Then press ENTER to enter or modify the blocked number.
Note: To clear a number from the list, see “Clearing a number from the
blocked numbers list,” right column.
6 Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber
ID of 972-555-3038, you should enter 5, 5, 5, DIALING OPTIONS , 3, 0,
3, 8:
To change a specific digit, press to move left or to move right until the
cursor is under the digit, then use the numeric keypad to enter the correct
number.
7 Press ENTER to save the setting. The LCD shows the next “slot” in the blocked
numbers list.
If you do not want to enter or change a number for this slot, go on to step 8.
If you do want to enter or change a number for this slot, repeat steps 5–7.
8 Press STOP . Your machine will return to standby mode.
Clearing a number from the blocked numbers list
To clear a number from the list:
1 Press Program key, B , 2, 1, 0, ENTER .
If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
2 Press or until you see your preference, Mode2 or Mode3.
3 Press ENTER . The LCD shows:
4 Press or until you see the number you want to clear.
5 Press CANCEL to clear the number.
To clear another number from the blocked numbers list, repeat steps 4–5.
Otherwise, go on to step 6.
6 Press STOP to return your machine to standby mode.
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the
blocked numbers.
To print a list of the blocked numbers, press Program key,
E , 1, 1, 0, ENTER .
Select BlockJunk No.
01:555-2971
Block Junk Fax:Mode2
 /  /Enter
Block Junk Fax:Off

/

/Enter
Enter Fax Number
01:555-3038_
Select BlockJunk No.
01:555-2971 Enter Fax Number
01:_
3.54