Konica Minolta 7013 - Manual (Page 44)

2.13
Basic operation
Stacking multiple copies
1 Press COPY / FAX to change to Copy mode.
2 Press SORT to turn the sort setting off.
Note: The default setting for sorting is On. To change the default setting,
see page 4.7.
3 Place your original document in ADF face up, or on the platen glass face
down just as you would to send a fax.
4 Enter the document size by pressing the DOCUMENT SIZE .
5 Using the numeric keypad to enter the number of copies you want (up to 99).
6 As needed, set the following:
• Select document type and adjust image contrast
• Set copy reduction or enlargement ratio
Note: For details about each items, see “Making copy settings,” pages
2.15–2.16.
7 Press START .
Note: To stop the copying, press STOP .
Sorting multiple copies (using
ADF
)
Note: You cannot use the platen glass for sorting multiple copies.
1 Press COPY / FAX to change to Copy mode.
2 Make sure the LED on SORT glows, which means the sort setting is turned on.
Note: If the LED does not glow, press SORT to turn it on.
3 Place your original document in ADF face up, just as you would to send a fax.
4 Set the document size by pressing the DOCUMENT SIZE .
5 Using the numeric keypad to enter the number of copies you want (up to 99).
6 As needed, set the following:
• Select document type and adjust image contrast
• Set copy reduction ratio
Note: For details about each items, see “Making the copy settings,” page 2.15.
7 Press START .
Note: To stop the copying, press STOP .
Enlarged or reduced copies
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copy-
ing, not for faxing.
Important: Copy enlargement is available only for copying using the platen glass;
it is not available for copying using the ADF .
1 Press COPY / FAX to change to Copy mode.
2 Place your original document in ADF face up, or on the platen glass face
down just as you would send a fax.
Note: If you want to enlarged copy, use the platen glass.
3 Enter the document size by pressing the DOCUMENT SIZE .
4 Choose an enlargement or reduction ratio using or of the cursor key.
You can reduce to 86%, 81%, 70% or 50 % of the original size
—OR—
You can enlarge to 115%, 122%, 141% or 200 %
—OR—
Press
ZOOM to turn the ZOOM light on, and adjust the ratio at 1% steps using
or of the cursor key. You can enter the ratio between 50% and 200%.
—OR—
Directly enter any percentage between 50 % and 200 % by following proce-
dure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
141%: A5 → A4
122%: A5
→ B5
JIS
115%: B5 JIS
→ A4
86%: A4
→ B5
JIS
81%: B5 JIS
→ A5
70%: A4
→ A5