Konica Minolta 7013 - Manual (Page 49)

2.18
Basic operation
Your fax machine can also be used as a phone, if a telephone is connected to your fax
machine. The following is a brief look at the machine’s telephone features.
Dialing a telephone number
1 Pick up the telephone’s handset which is connected to your fax machine.
You will hear a dial tone.
2 Dial the number by the using numeric keypad.
— or —
Press the one-touch key. (See “One-touch phone dialing,” on page 3.4.)
— or —
Press SPEED DIAL / TEL INDEX once, then press the three digit speed-dial num-
ber. (See “Phoning via speed-dial,” on page 3.6.)
— or —
Press SPEED DIAL / TEL INDEX twice, then search the name you want to call
using the cursor key, then press START . (See “Telephone Index dialing,” page
3.8.)
3 When the other person answers, begin speaking.
On-hook dialing
Because your machine has a monitor speaker, you can dial without picking up the
handset.
1 Press MONITOR / CALL . You’ll hear a dial tone (unless you have set your speaker
volume to Off; see page 1.8), and the LCD shows:
2 Dial the number you want. Use either the numeric keypad, a one-touch key, a
speed-dial number or telephone index to dial.
Important: Your machine’s monitor speaker is not a speaker phone. If a person
answers the call, pick up the telephone’s handset to speak.
Note: If the call fails, press MONITOR / CALL to hang up.
Redial
Note: To use REDIAL / PAUSE key, you should assign it to a Soft key in advance. (See
page 3.16.)
1 Lift the telephone’s handset which is connected directly to your fax machine
to get a dial tone.
2 Press REDIAL / PAUSE . The LCD will show:
3 Your machine can remember the latest 10 dial numbers. Press or until
the dial number you want to redial appears.
4 Press START .
When the other person answers, use the telephone to speak to that person.
Changing the dialing type
If, with your machine set for “pulse” dialing, you must enter tones (“ DTMF ”) during a
call, press DIALING OPTIONS once (the “–!” symbol will be shown on the LCD ). Your
machine now will “tone” dial all subsequent numbers.
Note: To use DIALING OPTIONS key, you should assign it to a Soft key in advance.
(See page 3.16.)
Note: Using this key enables tone transmission from the numeric keypad after the
call is connected. When you hang up the call, your machine will return to
“pulse” dialing for the next call.
View Redial History
0:1234567890
** Tel Mode **
_
Using your fax machine as a phone