Turning off the transport mode, Adjust the monitor speaker’s volume, Loading paper – Konica Minolta 7013 User Manual

Page 19

Advertising
background image

1.8

Getting started

Turning off the transport mode

Important: After unlocking the mirror carriage (see page 1.5), you must turn the

transport mode off by following procedures.

When the machine is in the transport mode, the

LCD

shows:

To turn off the transport mode:

1

Press Program key, *,

E

.

2

Select Off by pressing

or . Then press

ENTER

to turn off the transport

mode. The mirror carriage will move to the home position.

Important: If you must reship the machine, turn on this mode to move the mirror

carriage to the transport position (in step 2, above, press

or

to

set the transport mode to On), then power off and lock the mirror car-
riage using the mirror carriage locking plate (see page 1.5).

Adjust the monitor speaker’s volume

You can set the volume of the monitor speaker.

1

Press

MONITOR

/

CALL

on the control panel. You now should hear a dial tone.

And press

or

of the cursor key. The

LCD

indicates the volume:

2

To turn the volume up, press .
To turn the volume down, press .

3

Press

MONITOR

/

CALL

again to hang up.

Loading paper

Acceptable paper size and cassette capacity

Paper source Paper type

Paper size

Capacity

Paper cassette Plain paper*

1

A4

, A5 , F4

500 sheets

A4

, A5 , A6

, F4

,

Plain paper*

1

Letter

, Legal

, Half-letter , 50 sheets

Bypass Tray

Executive , Custom-sized*

2

Envelopes

DL

, Com#10

, Monarch

1 sheet

Postcard

100

× 148mm

20 sheets

Transparency*

3

A4

20 sheets

*

1

Paper weight: 60 – 90 g/m

2

*

2

(97 – 216) mm × (140 – 356) mm

(Width × Length)

: It only can use if the optional

Printer Controller is attached.

*

3

We recommend: 3M PP2500 for laser printers or equivalent

Note: Do not use any paper which has been creased, wrinkled or has absorbed any

moisture.

Loading paper in paper cassette

Before you load paper, note the following:
• After you loaded paper in paper cassette, you must need to “tell” your machine

which size of the paper, A4-, A5- or F4-sized, you loaded.
You can do this by the “Setting of the paper size” operation. (See next page.)

Note: If you will be using A4-sized paper, there’s no need to adjust the cassette;

your machine is initially set for A4-sized paper. Simply attach the A4
sticker to the outside of the paper cassette.

1

Open the paper cassette from the front of your machine by gently pulling it
toward you.

**

Tel Mode **

Volume:

■ ■

■ ■

■ ■

Mirror Locked :Off



/



/Enter

Mirror Locked :On



/



/Enter

Mirror Locked

Advertising