Konica Minolta 7013 - Manual (Page 48)

2.17
Basic operation
Negative/Positive (reversing black and white areas)
If using this feature, the black and white areas of the original are reversed.
Note: You cannot combine this feature with Reduced or Enlarged copies.
Helpful tip: If you programmed a Soft key to turn on or off this feature, simply
pressing that key will turn on or off this feature.
1 Make sure the machine is in the Copy mode.
2 Place your original document in ADF face up, or on the platen glass face down.
3 Enter the document size by pressing the DOCUMENT SIZE .
4 Press ADVANCED FUNCTIONS , ENTER . The LCD shows the current setting:
Note: This feature is Off for default setting. However, you can turn it on for
the default. (See page 4.7.)
5 Press or until the setting you want appears.
In this example, we’ve chosen On.
6 Press ENTER to save the setting. The machine returns to the standby mode
with following display:
7 As needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
8 Press START .
Note: To reset the copy parameter to default setting, press COPY RESET .
Note: To stop the copying, press STOP .
Copy protection
With such a versatile copier built right into your fax machine, you might want to
make sure it doesn’t become too tempting to unauthorized copying that could
deplete your machine’s supplies more rapidly. So, to limit the use of your fax
machine to only sending and receiving faxes — in other words, to activate copy pro-
tection:
1 Press Program key, B , 3, 0, 5, ENTER .
2 Press or until the setting you want appears.
In this example, we’ve chosen On.
3 Press ENTER to save the setting.
Whenever someone tries to change the machine to Copy mode, the machine will
sound a brief alarm tone and display:
To turn copy protection to use the machine’s copying function, repeat steps 1-3, in
step 2, you press
so that the display shows:
Copy Protect :Off
 /  /Enter
Fax Ready
Copy Off
Copy Protect
** Complete **
Copy Protect :On
 /  /Enter
Copy Protect :Off
 /  /Enter
Copy <Nega/Posi> 1
A4 Auto 100%
Nega/Posi :On
 /  /Enter
Nega/Posi :Off
 /  /Enter