Konica Minolta 7013 - Manual (Page 54)

Advanced features
Erasing a one-touch number
1 Press Program key, A , 1, 0, 2, ENTER . The LCD shows the one-touch number
you have already entered:
Note: If the one-touch number that appears is other than 01, it means that
01 is empty.
2 Press the key for the one-touch number you want to erase.
Here, we’ve selected 02:
3 If you want to erase a number stored in a different one-touch key than what
appears on the
LCD , press that key now.
4 Press ENTER . The LCD shows:
Important: If you want to quit without erasing the one-touch number
you’ve selected, press CANCEL . The fax will return to step 2.
5 Press ENTER to erase the number.
To erase another one-touch number, repeat steps 2–5. Or press STOP to return to
standby mode.
Printing a list of one-touch numbers
Forgot which number is stored in which one-touch key? Just print a list of your one-
touch numbers. The list includes each key’s number, the Location
ID (if any),
fax/telephone number and group number(s) you’ve stored in the key.
To print a list of one-touch numbers, press Program key,
E , 1, 0, 6, ENTER .
One-touch fax dialing
To dial a fax call using a one-touch number:
1 Place the the document in the ADF , or on the platen glass.
2 If you are using the platen glass, enter the document size by pressing the
DOCUMENT SIZE .
3 Adjust resolution and contrast if necessary.
4 Press the one-touch key in which you’ve stored the number.
What happens next depends on whether you specified memory transmission or
real time transmission:
If you specified Quick Memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The
LCD shows the Location ID and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location ID , the number appears.
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.3.)
If you specified normal memory transmission:
• Your fax machine scans your entire document into memory first, then dials the
other fax machine.
• The LCD shows the Location ID and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location ID , the number appears.
• When the other machine answers, your fax transmits the document directly from
memory. (To review Memory transmission, see page 2.3.)
Plano Office
A4 Normal
Plano Office
A4 Normal
Erase One-Touch
** Complete **
02:Erase One-Touch
Check Enter/Cancel
Select One-Touch
02:9-1-555-987-6543
Select One-Touch
01:9-1-555-345-6789
3.3