Konica Minolta 7013 - Manual (Page 74)

Using alternative telephone network service providers
Your fax machine is fitted with a Soft Key on the control panel to allow easy access
to other telephone networks such as Cable Telecom, Sprint or AT&T.
For this feature to work, either Dial Prefix or Dialing Options should be assigned to
Soft Keys. (Refer to page 3.1 and 3.16.)
The following information describes how to program the access number for the
Cable Telecom. For other networks you will have to program the appropriate access
number in place of the Cable Telecom access number. You can enter numbers up to
40 digits.
1 Press Program key, B , 2, 1, 5, ENTER .
2 Enter the Telephone network access number on the numeric keypad. In this
example, we've entered 131 (Mercury
PIN code service). If you entered 132
(Cable Telecom), skip to step 5.
Note: If you wish to access the Telephone network from a PBX , enter the PSTN
access code followed by a dialling pause (the dialling pause is only
necessary on pulse dial
PBX 's) before you enter the 131 or 132.
i.e., 9-/131-/ PIN , or 9-/132 if a pause is required.
3 Press REDIAL / PAUSE on the control panel to enter a "-/" in the LCD . This
instructs your fax machine to wait for a secondary dial tone before dialling
the
PIN number.
4 Now enter your PIN number (10 digits).
Note: If you wish to erase your PIN number, press CANCEL to erase all pro-
grammed numbers before proceeding to step 5.
5 Press ENTER to save the setting.
Sending faxes with Dial prefix feature
Note: If you use the MONITOR / CALL key to dial, you cannot use DIALING OPTIONS
key. You must assign Dial Prefix to one Soft Key in advance and use it.
To dial using the numeric keypad
1 Set the documents.
2 Press the Soft Key assigned DIAL PREFIX once or DIALING OPTIONS three times,
then the LCD will show a "!" symbol to indicate the access to the alternative
telephone network.
3 Dial a cost centre code (2 or 3 digits) if you selected this option when ordering
Cable Telecom service. Enter the fax number using the numeric keypad.
4 Press START .
Notes:
• You must enter the full National Code telephone number when dialling tele-
phone numbers via any network.
• You can not enter the Soft Key followed by the one-touch or speed-dial key (see
below for more information).
To dial using the one-touch or speed-dial keys
In order to send faxes using the one-touch or speed-dial keys, you must instruct
your fax machine to access the alternative telephone network when you store the
fax number into your autodialler.
To enter the access number into your autodialler:
Before entering a fax number, press the Soft Key assigned
DIAL PREFIX . And then,
enter the fax number.
To send faxes using the autodialler:
Set the document and press the one-touch key or enter the speed-dial number, as
usual.
Press Start
Dial Prefix No
131-/1234567890_
Dial Prefix No
131-/_
Dial Prefix No
131_
Dial Prefix No
_
Advanced features
3.23