Konica Minolta 7013 - Manual (Page 45)

2.14
Basic operation
Helpful Tip: You can set the copy reduction or enlargement ratio to “Auto”.
(See “Setting copy auto,” page 4.7.) If the “Auto” is set and you
set the document size by pressing
DOCUMENT SIZE , the machine
automatically reduce or enlarge the original size (you entered)
to fit on the paper size you selected.
5 As needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
6 Press START .
Note: To reset the copy parameter to default setting, press COPY RESET .
Note: To stop the copying, press STOP .
Using the bypass tray
When you need to use a size of paper not currently loaded in your machine’s paper
cassette(s), or when you want to use a special type of paper (such as transparency
film), use the bypass tray.
Important: If loading transparency (OHP) film into the bypass tray, be sure that
the sheet is designed for laser printers and not for copiers. Also, be
sure that the film does not have a paper backing and/or a leading
strip. If it does, remove the paper backing and/or strip before insert-
ing. Only film should go in, not film with any backing or strip.
1 Either insert the document in the ADF or place it on the platen glass.
2 Set the paper in the bypass tray.
See the table of “Acceptable paper size and cassette capacity” on page 1.8 and
“Loading paper in bypass tray” on page 1.10 for more information.
Note: Place the original document in the same orientation as the paper in
the paper source.
3 The machine will select the bypass tray for the paper
source and the
LCD will show the default paper size you
selected in step 6 on page 1.10.
If you want to change it, proceed to step 4.
Otherwise, skip to step 10.
4 Press BYPASS to change the paper size. The LCD will show:
5 If your recording paper in the bypass tray is A4, A5 or F4, proceed to step 6.
Otherwise, skip to the step 7.
Note: When you use transparency film, skip to step 8 and select “OHP” in
step 9.
6 Press or until your desired recording paper size appears. Here, we’ve
chosen A5 :
Skip to step 9.
7 Press or until “Other” appears.
Then press or ENTER . You will see:
8 Press or until your desired recording paper size appears. Here, we’ve
chosen Postcard:
9 Press ENTER .
10 If necessary, select desired resolution, contrast, reduction/enlargement ratio.
11 Press START to begin the copying process.
Set Bypass Ppr:Post
 
/  /  /Enter
Set Bypass Ppr:Exe
 
/  /  /Enter
Set Bypass Ppr:Other
 
/  /  /Enter
Set Bypass Ppr:A5
 /  /Enter
Set Bypass Ppr:A4

/

/Enter
Copy Ready 1
[ A4 ] A4 100%