Konica Minolta 7013 - Manual (Page 77)

6 Use the numeric keypad to enter the 4-digit I . D . code (not the ITU - T sub-
address and not the ITU - T password) and then press ENTER .
Note: If you enter an invalid I . D . code, the fax machine rejects the attempt
and aborts this operation.
7 The machine is now asking you to name this F-Code box. The LCD shows:
or
If you do not want to enter or change this F-Code box’s name, skip to step 9.
If you do want to enter or change this F-Code box’s name, go on to step 8.
8 Enter the name by using the one-touch keys. (If necessary, review “Entering
characters”, page 1.12) An F-Code box’s name can be up to 16 characters in
length.
9 Press ENTER to save the box’s name and continue. The LCD shows:
or
The fax machine now asks for this F-Code box’s sub-address. This is the
numerical identifier you must enter in order to communicate with any remote
F-Code compatible fax.
If you do not want to change an existing sub-address, skip to step 11.
10 Use the numeric keypad to enter the sub-address to identify this F-Code box.
The sub-address can be up to 20 characters in length and include any
combination of numbers and the * and # characters (but no other non-
numeric characters).
Note: No other F-Code box in this machine can have the same sub-address
as the one you enter here.
11 Press ENTER to save the sub-address.
Note: If you entered a sub-address already being used by another F-Code
box, the machine beeps and briefly displays:
The machine now returns you to step 10. Please enter a different
number for your F-Code box’s sub-address.
12 Next, the machine asks for your F-Code box’s password. This is the password
for
ITU - T -compatible F-Code fax transactions. The LCD shows:
or
Note: You don’t need to have a password for the F-Code box. However, using
a password will make your F-Code communication much more secure.
If you do not want to enter or change this box’s password, skip to step 14.
13 Use the numeric keypad to enter this box’s ITU - T -compatible password. This
password can be up to 20 characters in length and include any combination of
numbers and the * and # characters (but no other non-numerical characters).
Here, we’ve entered 135*7#9.
Note: You cannot change the type of an existing F-Code box. If you’re modi-
fying an existing F-Code box and want to change the box type, you
first must erase the old box, then create a new one.
14 Press ENTER to save the password. The LCD now shows:
The fax machine is asking which box type you want to assign to this box —
bulletin, security or relay.
Press or until the type of box you want appears.
15 Press ENTER .
If you chose Bulletin, go on to step 16.
If you chose Security, skip to step 17.
If you chose Relay, skip to step 20.
If you chose Bulletin:
16 The bulletin box has four additional settings:
• Reception protection (“Rx Protect” on the
LCD )
• Automatic printing of received documents (“Auto Print”)
• Overwriting documents (“Overwrite Doc.”)
• Erasure of transmitted documents (“Erase Tx Doc.”)
Box Type :Bulletin
 /  /Enter
03:Password
135*7#9_
03:Password
123456789*#_ 03:Password
_
03:Sub-Address No.
Sub-Address In Use
03:Sub-Address No.
654321_
03:Sub-Address No.
123456_ 03:Sub-Address No.
_
03:Box Name;Upper
Konica America_ 03:Box Name;Upper
_
Advanced features
3.26