Searching the functions using the cursor key – Konica Minolta 7013 User Manual
Page 24
1.13
Getting started
Searching the functions using the cursor key
In this manual, we explain the operation with short-cut operations (for example, we
will say, “press Program key,
A
, 1, 0, 1. . .”), however you can search and enter
almost all of functions using the Program key and Cursor key.
Helpful Tip: When you want to search any function settings in your machine, you
will need the function table (see next page) for your searching. Please
use it for your help.
To search and enter the function set-
tings:
1
Press the Program key.
2
Search the level one function
groups using
or
of cursor key
until your desired item appears.
3
After you find the level one function item you want to program, press
of
cursor key to go to the level two function groups .
4
Search the level two function groups using
or
of cursor key until your
desired item appears.
5
After you find the level two function item you want to program, press
of
cursor key to go to the level three function groups .
6
Search the level three function groups using
or
of cursor key until your
desired function appears.
Note: You can go back to previous level function groups by pressing
of
cursor key before you have entered the level three function by press-
ing
ENTER
.
7
Press
ENTER
to entry the function setting.
Note: You can press Program key to entry the setting instead of
ENTER
.
Cursor keys
Program key