KORG MICROX X50 - Manual (Page 124)

117
EFFECT
24: St.Rndm Phasr
(Stereo Random Phaser)
This is a stereo phaser. The effect uses a step-shape waveform
and random LFO for modulation, creating a unique phasing
effect.
25: St.Env.Phaser
(Stereo Envelope Phaser)
This stereo phaser uses an envelope generator for modula-
tion. You will obtain the same pattern of phasing each time
you play. You can also control the Phaser directly using the
modulation source.
a
LFO Wave (LFO Waveform) Step-Tri, Step-Sin, Random
Selects LFO Waveform ☞ Fx:10
b
LFO Phase –180...+180deg
Sets the LFO phase difference between the left and right ☞ Fx:10
c
Freq (LFO Frequency) 0.02...20.00Hz
Sets the LFO speed ☞ Fx:10,
(Source) Off...Tempo
Selects the modulation source commonly used for LFO speed and
step speed
(Amount) –20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
Freq (LFO Step Frequency) 0.05...50.00Hz
Sets the LFO step speed ☞ Fx:10,
(Amount) –50.00...+50.00Hz
Sets the modulation amount of LFO step speed
e
Manual
Sets the frequency to which the effect is applied 0...100
Depth
Sets the depth of LFO modulation 0...100
f
BPM/MIDI Sync Off, On
Switches between using the frequency of the LFO speed and using
the tempo and notes
☞ Fx:09,
BPM
Selects MIDI Clock and assigns tempo MIDI, 40...240
Fx:09, 10
Base (Base Note)
Selects the type of notes that specify the LFO speed ☞ Fx:09
Times 1...16
Sets the number of notes that specify the LFO speed ☞ Fx:09
g
Step Base (Step Base Note
Selects the type of notes to specify the LFO step speed
☞ Fx:10,
Times 1...32
Sets the number of notes to specify the LFO step speed ☞ Fx:10
h
Resonanc (Resonance)
Sets the resonance amount –100...+100
☞ Fx:23
HiDamp (High Damp) 0...100%
Sets the resonance damping amount in the high range ☞ Fx:23
i
W/D (Wet/Dly) –Wet...–1:99, Dry, 1:99...Wet
Sets the balance between the effect and dry sounds
☞ Fx:10, 23,
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
LFO: Step-Tri/Random
Left
Right
Resonance
LFO Phase
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
Phaser
Phaser
a
L Manu Bottom (L Manual Bottom) 0...100
Sets the lower limit of the frequency range for the effect on the left
channel
☞ Fx:09
b
L Manu Top (L Manual Top) 0...100
Sets the upper limit of the frequency range for the effect on the left
channel
☞ Fx:09
c
R Manu Bottom (R Manual Bottom) 0...100
Sets the lower limit of the frequency range for the effect on the right
channel
☞ Fx:09
d
R Manu Top (R Manual Top) 0...100
Sets the upper limit of the frequency range for the effect on the right
channel
☞ Fx:09
e
Swp Mode (Sweep Mode) EG, Dmod
Determines whether the flanger is controlled by the envelope gener-
ator or by the modulation source
☞ Fx:22,
Src (Source) Off...Tempo
Selects the modulation source that triggers the EG (when EG is
selected for Swp Mode), or modulation source that causes the
flanger to sweep (when Dmod is selected for Swp Mode)
f
EG Attack
Sets the EG attack speed 1...100
☞ Fx:22
g
EG Decay
Sets the EG decay speed 1...100
☞ Fx:22
h
Resonance
Sets the resonance amount –100...+100
☞ Fx:23
i
High Damp 0...100%
Sets the resonance damping amount in the high range ☞ Fx:23
j
W/D (Wet/Dly) –Wet...–1:99, Dry, 1:99...Wet
Sets the balance between the effect and dry sounds
☞ Fx:10, 23,
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
EG Attack/Decay
EG
D-mod
Sweep Mode
D -mod
Phaser
Phaser
Left
Right
Resonance
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out