KORG MICROX X50 - Manual (Page 142)

135
EFFECT
Mono
→ Mono Chain
Effects that combine two mono effects con-
nected in series
58: P4EQ–Exciter
(Parametric 4-Band EQ – Exciter)
This effect combines a mono-type four-band parametric
equalizer and an exciter.
59: P4EQ–Wah
(Parametric 4-Band EQ – Wah/Auto Wah)
This effect combines a mono-type four-band parametric
equalizer and a wah. You can change the order of the connec-
tion.
a
[PEQ] Trim
Sets the parametric EQ input level 0...100
b
B1 (Band1 Cutoff)
Sets the center frequency of Band 1 20...1.00kHz
Q
Sets the bandwidth of Band 1 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 1 –18...+18dB
c
B2 (Band2 Cutoff)
Sets the center frequency of Band 2 50...5.00kHz
Q
Sets the bandwidth of Band 2 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 2 –18...+18dB
d
B3 (Band3 Cutoff)
Sets the center frequency for Band 3 300...10.00kHz
Q
Sets the bandwidth of Band 3 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 3 –18...+18dB
e
B4 (Band4 Cutoff)
Sets the center frequency for Band 4 500...20.00kHz
Q
Sets the bandwidth of Band 4 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 4 –18...+18dB
f
[XCT] Blend (Exciter Blend)
Sets the intensity (depth) of the Exciter effect –100...+100
☞ Fx:11
g
Emphatic Point
Sets the frequency range to be emphasized 0...70
☞ Fx:11
h
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Trim
+ Exciter
Parametric 4Band EQ Exciter
a
[PEQ] Trim
Sets the parametric EQ input level 0...100
b
B1 (Band1 Cutoff)
Sets the center frequency of Band 1 20...1.00kHz
Q
Sets the bandwidth of Band 1 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 1 –18...+18dB
c
B2 (Band2 Cutoff)
Sets the center frequency of Band 2 50...5.00kHz
Q
Sets the bandwidth of Band 2 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 2 –18...+18dB
d
B3 (Band3 Cutoff)
Sets the center frequency for Band 3 300...10.00kHz
Q
Sets the bandwidth of Band 3 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 3 –18...+18dB
e
B4 (Band4 Cutoff)
Sets the center frequency for Band 4 500...20.00kHz
Q
Sets the bandwidth of Band 4 0.5...10.0
☞ Fx:06
G (Gain)
Sets the gain of Band 4 –18...+18dB
f
[WAH] FreqBtm (Frequency Bottom)
Sets the lower limit of the wah center frequency 0...100
☞ Fx:09
Top (Frequency Top)
Sets the upper limit of the wah center frequency 0...100
☞ Fx:09
g
Swp Mode (Sweep Mode) Auto, Dmod, LFO
Selects the control from auto-wah, modulation source, and LFO
☞ Fx:09,
Src (Source) Off...Tempo
Selects the modulation source for the wah when Sweep Mode=D-
mod
h
lfoF (LFO Frequency)
Sets the LFO speed 0.02...20.00Hz
Res (Resonance)
Sets the resonance amount 0...100
LPF (Low Pass Filter)
Switches the wah low pass filter on and off Of, On
i
[Routing] PEQ → WAH, WAH → PEQ
Changes the order of the parametric equalizer and wah connection
j
W/D (Wet/Dly) Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
(Source) Off...Tempo
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Trim
+
Parametric 4Band EQ
Routing
Wah/Auto Wah
Wah
D -mod
Envelope
Sweep Mode
D-mod
Auto
LFO
LFO