KORG MICROX X50 - Manual (Page 187)

180
Various messages
A
Are you sure?
C
Can’t calibrate
Completed
M
Memory protected
MIDI data receiving error
N
Now Writing into internal memory
• While writing (updating) Programs, Combinations,
Multi set, Multi set, Global Settings, Drum Kits, or
Arpeggio Patterns
• While receiving a MIDI data dump of Program,
Combination, Multi set, Global Setting, Drum Kit, or
Arpeggio Pattern data
• If writing to internal memory could not be completed
successfully because the power was turned off while
writing (or for any other reason), the X50/microX will
automatically initialize the internal memory the next
time the power is turned on, in order to ensure that the
memory is in the correct state. This message will be
displayed while the data is being written.
Now receiving MIDI data
A data dump or other large quantity of MIDI data is being
received.
Now transmitting data
A data dump or other large quantity of MIDI data is being
received.
Meaning: This message asks you to confirm execution. To
executepress the [MENU/OK] button. To cancel,
press the [EXIT/CANCEL] button.
Meaning: Calibration could not be performed correctly.
Action:
Try again.
Meaning: Execution of the command ended normally.
Meaning: The internal program, combination, multi set, or
drum kit is protected.
Action: In Global mode, turn off write-protect, and exe-
cute the write or load operation once again.
Meaning: While receiving MIDI System Exclusive data, the
format of the received data was invalid, for exam-
ple because the size of the data was incorrect.
Meaning: This message will appear while data is being writ-
ten into internal memory. It will appear in the fol-
lowing situations.