Mod./p.shift, St.tremolo (stereo tremolo), St.env.tremlo (stereo envelope tremolo) – KORG MICROX X50 User Manual

Page 129: St.env.tremlo, Stereo envelope tremolo), St.tremolo, Other modulation and pitch shift effects, Stereo tremolo)

Advertising
background image

122

Mod./P.Shift

Other modulation and pitch shift effects

32: St.Tremolo

(Stereo Tremolo)

This effect modulates the volume level of the input signal.
The effect is stereo, and offsetting the LFO of the left and right
phases from each other produces a tremolo effect between left
and right.

a: LFO Wave

This parameter selects the LFO waveform. Vintg (Vintage) wave
simulates the characteristics of the tremolo created on a guitar
amplifier. Combining this effect with the Amp Simulation will
make a realistic, vintage tremolo amplifier sound.

b: LFO Phase

This parameter determines the difference between the left and
right LFO phases. A higher value will simulate the auto-pan effect
in which the sound is panned between left and right.

33: St.Env.Tremlo

(Stereo Envelope Tremolo)

This effect uses the input signal level to modulate a stereo
tremolo. You can simulate a tremolo effect that becomes
deeper as it fades out while the level gets lower.

e: Freq, e: (Envelope Amount), f: Depth, f: (Envelope Amount)

These parameters set the modulation via an envelope (input sig-
nal level).
The “LFO speed” is obtained by adding the “Freq” value to the
“(Envelope Amount)” value multiplied by the input signal. The
LFO modulation depth is obtained by adding the Depth value to
the “(Envelope Amount)” value multiplied by the input signal
level.
• The following example indicates that the “Depth” is 0 with an

LFO Frequency of 1.0Hz and the maximum input, and that
the “Depth” is 100 with a Frequency of 8.0 Hz with zero
input.
“Freq”=8.00 Hz, “Envelope Amount”=–7.00
“Depth”=100, “Envelope Amount”=–100

a

LFO Wave (LFO Waveform)

Tri, Sine, Vintg, Up, Down

Selects LFO Waveform

Shape (LFO Shape)

–100...+100

Determines how much the LFO waveform is changed

Fx:20

b

LFO Phase

–180...+180deg

Sets the LFO phase difference between the left and right

c

Freq (LFO Frequency)

0.02...20.00Hz

Sets the LFO speed

Fx:09,

(Source)
Selects the modulation source of LFO speed

Off...Tempo

(Amount)

–20.00...+20.00Hz

Sets the modulation amount of LFO speed

d

BPM/MIDI Sync

Off, On

Switches between using the frequency of the LFO speed and using
the tempo and notes

Fx:09,

BPM
Selects MIDI Clock and assigns tempo

MIDI, 40...240

Fx:09

Note (Base Note)

Selects the type of notes that specify the LFO speed

Fx:09

Times

1...16

Sets the number of notes that specify the LFO speed

Fx:09

e

Depth
Sets the depth of LFO modulation

0...100

(Source)

Off...Tempo

Selects the modulation source of the depth of modulation

(Amount)

–100...+100

Sets the modulation amount of the depth of modulation

f

W/D (Wet/Dly)

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

(Source)

Off...Tempo

Selects the modulation source of the effect balance

(Amount)
Sets the modulation amount of the effect balance

–100...+100

Left

Right

Wet / Dry

Wet / Dry

Stereo In - Stereo Out

LFO Phase

LFO: Tri/Sin/Vintage/Up/Down

LFO Shape

Tremolo

Tremolo

Tremolo - LFO Waveform

Triangle

Sine

Vintage

Up

Down

a

Envelope Sens (Envelope Sensitivity)
Sets the envelope sensitivity of the input signal

0...100

b

Envelope Shape
Sets the envelope curve shape of the input sig-
nal

–100...+100

c

LFO Wave (LFO Waveform)

Tri, Sine, Vintg

Selects LFO Waveform

Shape (LFO Shape)

–100...+100

Determines how much the LFO waveform is changed

Fx:20

d

LFO Phase

–180...+180deg

Sets the LFO phase difference between the left and right

Fx:32

e

Freq (LFO Frequency)
Sets the LFO speed

0.02...20.00Hz

(Envelope Amount)

–20.00...+20.00Hz

Sets the changes of the LFO speed according to the input signal
level

f

Depth
Sets the depth of LFO modulation

0...100

(Envelope Amount)

–100...+100

Sets the changes of the modulation depth according to the input sig-
nal level

g

W/D (Wet/Dly)

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

(Source)

Off...Tempo

Selects the modulation source of the effect balance

(Amount)
Sets the modulation amount of the effect balance

–100...+100

Left

Right

Wet / Dry

Wet / Dry

Stereo In - Stereo Out

LFO Phase

LFO Shape

Envelope Sens

+

Envelope

LFO: Tri/Sin/Vintage

Envelope Shape

Tremolo

Tremolo

Advertising