KORG MICROX X50 - Manual (Page 172)

165
Ap
pendic
es
Foot Pedal Assign
You can assign the function that will be controlled by an
assignable pedal (separately sold Korg XVP-10 or EXP-2
option) connected to the ASSIGNABLE PEDAL jack.
• This setting is made in GLOBAL 0: System Foot page
“Foot Pedal Assign” (0–3a).
If you select a function that includes a CC#, that MIDI
control change message will be transmitted each time
the pedal is operated. (min: 0, max: 127)
Foot Pedal Assign List
Even if you set “Foot Pedal Assign” to Knob1...4, you
cannot use a connected foot switch to control the REAL-
TIME CONTROLS C-mode arpeggiator effect. Nor will
it transmit MIDI control messages.
Off The connected pedal will not function.
Master Volume Control the volume. Simultaneously, the universal exclusive message Master Volume [F0H, 7FH,
nn, 04, 01, vv, mm, F7H] will be transmitted to control the volume of all timbres or tracks (while pre-
serving the volume balance between timbres or tracks).
Foot Pedal (CC#04) Alternate Modulation or Effect Dynamic Modulation can be controlled. To control these, set “AMS”
to Pedal #04 or “Dmod Src” to Pdl#04.
Portamento Time (CC#05) Control the speed at which portamento will change the pitch.
Volume (CC#07) Control the volume of a Program, of a timbre in a Combination, or of a track in Multi mode.
Post IFX Pan (CC#08) Control the pan after passing through the insertion effect.
Pan (CC#10) Control the pan of a Program, of a timbre in a Combination, or of a track in Multi mode.
Expression (CC#11) Control the volume of a Program, of a timbre in a Combination, or of a track in Multi mode. Expres-
sion is multiplied with the Volume value to determine the actual volume level.
FX Control 1 (CC#12) Control Effect Dynamic Modulation. To control this, set Dmod Src to FX1#12.
FX Control 2 (CC#13) Control Effect Dynamic Modulation. To control this, set Dmod Src to FX2#13.
MFX Send 1 (CC#93) Control the send level to master effect 1 (MFX1) from a Program, a timbre in a Combination, or a
track in Multi mode. Simultaneously, this will also control the send level to master effect 1 (MFX1)
from after the insertion effect of the matching MIDI channel.
MFX Send 2 (CC#91) Control the send level to master effect 2 (MFX2) from a Program, a timbre in a Combination, or a
track in Multi mode. Simultaneously, this will also control the send level to master effect 2 (MFX2)
from after the insertion effect of the matching MIDI channel.
X50: Mod.Wheel (CC#01)/microX: JS+Y
(CC#01) X50: The pedal will control the effect of the “up” direction of the [MOD] wheel.
microX: The pedal will control the effect of the +Y (up) direction of the joystick.
JS–Y (CC#02) X50: The pedal will control Alternate Modulation or Effect Dynamic Modulation. To control these,
choose JS–Y#2 for “AMS,” or JS–Y#2 for “Dmod Src.”
microX: The pedal will control the effect of the –Y (down) direction of the joystick.
After Touch The pedal will control aftertouch.
Knob 1...4 Pedal operation will control the effect of REALTIME CONTROLS knobs [1]–[4].