KORG MICROX X50 - Manual (Page 156)

149
EFFECT
Master EQ
Master EQ
Use the 9–4 MasterFX MEQ page in the Program, Combina-
tion, and Multi modes
You cannot use the Master EQ as the Insert Effect or as one
of the Master Effects.
a: Gain, b: Gain, c: Gain
These parameters are linked with the “Master EQ Gain [dB]” (9–
1c) parameter of the MasterFX.
d: Low Gain Mod-Src
For example, when this parameter is set to Kb1#17, you can con-
trol the EQ gain in the range from –18dB to +18dB during perfor-
mance using the [REALTIME CONTROLS] knob. At this time, set
Knob 1-B to Knob Mod1 (CC#17) for “Knob B-Assign” (PROG 7–
3a, COMBI 7–5a, MULTI 7–6a). The 12 o’clock position of the knob
corresponds to the “Low Gain” value here.
e: High Gain Mod-Src
For example, when this parameter is set to Kb2#19, you can con-
trol the EQ gain in the range from –18dB to +18dB during perfor-
mance using the [REALTIME CONTROLS] knob. At this time, set
Knob 2-B to Knob Mod2 (CC#19) for “Knob B-Assign” (PROG 7–
3a, COMBI 7–5a, MULTI 7–6a). The 12 o’clock position of the knob
corresponds to the High Gain value here.
a
Low Cutoff 20...1.00KHz
Sets the cutoff frequency of Low EQ (shelving type)
Gain –18.0...+18.0 (0.5step)dB
Sets the gain of Low EQ
b
Mid Cutoff 300...10.00KHz
Sets the cutoff frequency of Mid EQ (peaking type)
Q 0.5...10.0 (0.1step)
Sets the band width of Mid EQ. With a higher value, the band
become narrower.
Gain –18.0...+18.0 (0.5step)dB
Sets the gain of Mid EQ
c
High Cutoff 500...20.00KHz
Sets the cutoff frequency of High EQ (shelving type)
Gain –18.0...+18.0 (0.5step)dB
Sets the gain of High EQ
d
Low Gain Mod-Src
Selects the modulation source for Low Gain Off...Tempo
e
High Gain Mod-Src
Selects the modulation source for High Gain Off...Tempo
Left
Right
Low Mid High
D -mod
D -mod
LEQ
Low Gain Mod.
Low Gain Mod - Src
High Gain Mod - Src
High Gain Mod.
PEQ HEQ
LEQ PEQ HEQ
L/Mono
R