Lexmark 9500 Series - Manual (Page 111)

Understanding the Bluetooth Default Settings menu
1 From the control panel, press or repeatedly until Setup is highlighted.
2 Press .
3 Press or repeatedly until Change Bluetooth Default Settings is highlighted.
4 Press .
5 After making your choices, press to save your selections as the default settings.
From here You can
Bluetooth Enabled Turn the Bluetooth function on or off.
Discovery Mode Turn the discovery mode on or off. Choosing On allows the printer to detect
other compatible Bluetooth-enabled devices.
Security Set the security level to Low or High. The default setting is Low, which allows
Bluetooth-enabled devices to connect and send jobs to the printer without
entering a pass key. If the security is set to High, a four-digit pass key is required
before Bluetooth-enabled devices can connect to the printer.
Pass Key Set or change the pass key. The default value is “0000”.
Trusted Devices - Clear All Clear the list of Bluetooth-enabled devices allowed to communicate with the
printer.
Device Name View the Device Name and the Universally Administered Address (UAA) number
automatically assigned to your Bluetooth-enabled device.
Device Address View the 48-bit address of your Bluetooth-enabled device.
Paper Handling Set or change the default settings for the loading of paper in the paper tray or
trays. For more information, see “Understanding the Paper Handling menu” on
page 85.
Printing
111