Lexmark 9500 Series - Manual (Page 143)

From here You can
Scan to Choose the computer receiving the scan, if there is more than one computer
connected to the printer.
Color Choose to scan your document in color or black and white.
Quality Choose a scan quality: 150 dots per inch (dpi), 300 dpi, or 600 dpi.
Original Size Set the size of the original document.
Change Scan Default
Settings Change the default scan settings. These settings are for color, quality, and original
size.
Changing the default scan settings
1 From the control panel, press or repeatedly until Scan is highlighted.
2 Press .
3 If your printer is connected to more than one computer:
a Press or repeatedly until the computer to which you want to scan is highlighted.
b Press .
If you set a PIN during network setup and are being asked for it:
1 Enter the PIN using and to select a digit location and and to select a value for that digit.
2 Press .
4 Wait until the printer has finished downloading the scan applications list.
5 Press or repeatedly until Change Scan Default Settings is highlighted.
6 Press .
From here You can
Color Choose to scan your document in color or black and white.
Quality Choose a scan quality: Automatic, 150 dots per inch (dpi), 300 dpi, or 600 dpi.
Original Size Set the size of the original document: Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,
3 in x 5 in, 4 in x 6 in, 4 in x 8 in, 5 in x 7 in, 8 in x 10 in, or letter.
7 Use the control panel buttons to navigate the menu items and make your choices.
8 Press to save your settings.
Scanning
143