Lexmark 9500 Series - Manual (Page 242)

4 Check to see if On is selected.
5 If not, press or until On appears.
6 Press to save.
C
HECK INK
Check the ink levels, and install a new print cartridge if necessary.
M
AKE SURE
F
AX
F
ORWARDING IS NOT SELECTED
1 From the control panel, press or repeatedly until Fax is highlighted.
2 Press .
3 Press or repeatedly until Fax Setup is highlighted.
4 Press .
5 Press or repeatedly until Ringing and Answering is highlighted.
6 Press .
7 Press or repeatedly until you reach Fax Forward.
8 Press or repeatedly until Off appears.
9 Press to save the setting.
Can receive but not send faxes
These are possible solutions. Try one or more of the following:
C
HECK MODE SELECTION
To make sure the printer is set for faxing:
1 Press or repeatedly until Fax is highlighted.
2 Press .
C
HECK DOCUMENT PLACEMENT
Load the original document facedown in the upper left corner of the scanner glass.
C
HECK THE
D
IAL
P
REFIX SETTING
1 From the control panel, press or repeatedly until Fax is highlighted.
2 Press .
3 Press or repeatedly until Fax Setup is highlighted.
4 Press .
Troubleshooting
242