Lexmark 9500 Series - Manual (Page 189)

R
EINSTALL THE SOFTWARE
1 Turn off and then restart your computer.
2 Click Cancel on all New Hardware Found screens.
3 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
R
ECONNECT POWER SUPPLY
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
D
ISABLE ANTI
-
VIRUS PROGRAMS
1 Close all open software applications.
2 Disable any antivirus programs.
3 Double-click the My Computer icon.
In Windows XP, click Start to access the My Computer icon.
4 Double-click the CD–ROM drive icon.
5 If necessary, double-click setup.exe.
6 Follow the instructions on the computer screen to install the software.
U
NINSTALL AND REINSTALL SOFTWARE
Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the
software” on page 191.
Page does not print
These are possible solutions. Try one or more of the following:
C
HECK MESSAGES
If an error message is displayed, resolve the error before trying to print again.
C
HECK POWER
If the light is not on, make sure the printer is plugged into a properly grounded outlet. Make sure the power
cord is properly connected to the printer.
Troubleshooting
189