Lexmark 9500 Series - Manual (Page 211)

Page prints with different fonts
M
AKE SURE THE CORRECT PRINTER IS SELECTED
When printing from an application, make sure the selected printer is the correct printer you want to use to print
your job.
It is useful to have the default printer set to be the printer you use most often for printing.
M
AKE SURE THE
T
RUE
T
YPE FONT IS AVAILABLE ON THE COMPUTER
The font you are trying to print may not be available in the program font selection box. Not all fonts are designed
to be printed; make sure the font is a TrueType font. See the program documentation for more information.
M
AKE SURE THE FONTS ARE APPLIED CORRECTLY IN THE PROGRAM
Most programs do not print a stretched or resized font.
Print is too dark or smudged
These are possible solutions. Try one or more of the following:
M
AKE SURE THE INK IS DRY BEFORE HANDLING THE PAPER
Remove the paper as it exits, and let the ink dry before handling.
M
AKE SURE THE SETTING ON THE
P
RINT
S
ETUP TAB IS APPROPRIATE FOR THE PAPER TYPE
LOADED IN THE PRINTER
The setting on the Print Setup tab in Printing Preferences may need adjusting if the ink smears on plain paper. If
you are using plain paper, try using the Automatic or Normal setting. If you are using photo paper, try using the
Best setting.
M
AKE SURE THE PRINT CARTRIDGE NOZZLES ARE CLEAN
You may need to clean the print cartridge nozzles.
Printed characters are improperly formed or are not aligned
correctly
H
AVE YOU ADDED SPACES AT THE LEFT MARGIN
?
If the print is not aligned correctly, make sure you have not added spaces by pressing Enter or the spacebar (hard-
coded spaces).
Troubleshooting
211