Lexmark 9500 Series - Manual (Page 135)

Making a color or black-and-white copy
1 Load paper.
2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass
in the upper left corner.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3 From the control panel, press or repeatedly until Copy is highlighted.
4 Press or to select the number of copies.
The number of copies is automatically set to 1.
5 Press .
6 Press or repeatedly until Color is highlighted.
7 Press or to choose Color or Black & White.
8 If the original document is loaded on the scanner glass, you can preview the copy:
a Press to preview the copy.
b Press to continue adjusting the settings.
c Repeat step a and step b as needed.
9 Press to save your settings temporarily.
10 Press .
Copying on both sides of the paper (duplexing)
The printer has a built-in duplex unit that lets you print on both sides of the paper.
1 Load paper.
Note: Use only plain paper in letter or A4-size for making duplex copies. Do not make duplex copies on envelopes,
card stock, or photo paper.
2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass
in the upper left corner.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3 From the control panel, press or repeatedly until Copy is highlighted.
4 Press .
5 Press or repeatedly until 2-Sided Copies is highlighted.
6 Press or to select among the following options: 1-Sided Original, 1-Sided Copy; 1-Sided Original, 2-Sided
Copy; 2-Sided Original, 1-Sided Copy; or 2-Sided Original, 2-Sided Copy.
Copying
135