Lexmark 9500 Series - Manual (Page 190)

R
ELOAD PAPER
Remove and then load paper.
C
HECK INK
Check the ink levels, and install new print cartridges if necessary.
C
HECK CARTRIDGES
1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1 2
3 Reinsert the cartridges.
C
HECK PRINTER DEFAULT AND PAUSE SETTINGS
1 Do one of the following:
• In Windows Vista, click ŒControl Panel.
• In Windows XP, click Start.
2 Click Printers ΠPrinters and Faxes.
3 Double-click the printer queue device.
4 Click Printer.
• Make sure no check mark appears next to Pause Printing.
• If a check mark does not appear next to Set As Default Printer, you must select the print queue device for
each file you want to print.
R
ECONNECT POWER SUPPLY
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
R
EMOVE AND REINSTALL THE SOFTWARE
Uninstall the printer software, and then reinstall it.
Troubleshooting
190