Lantronix XPORT PROTM 900-560 - Manual (Page 109)

12: Maintenance and Diagnostics Settings
XPort Pro User Guide 109
ICMP Settings
To configure the ICMP network protocol:
1. Select Protocol Stack on the menu bar.
2. Select ICMP.
Figure 12-8 ICMP Protocol
3. Select the appropriate state.
4. Click Submit.
Table 12-9 ICMP Settings
Protocol Stack
ICMP Settings Description
State The State selection is used to turn on/off processing of ICMP messages.
This includes both incoming and outgoing messages. Choose
Enabled or
Disabled .