Smtp settings, To configure the smtp network protocol, Figure 12-12 smtp – Lantronix XPORT PROTM 900-560 User Manual
Page 111: Table 12-13 smtp settings
12: Maintenance and Diagnostics Settings
XPort Pro User Guide
111
Note:
Both the IP and MAC addresses are required for the ARP cache.
4.
Click Submit for ARP or Add after supplying both address fields for ARP cache.
5.
Remove entries from the ARP cache, as desired:
Click Remove All to remove all entries in the ARP cache.
OR
Click Remove beside a specific entry to remove it from the ARP cache.
SMTP Settings
SMTP is configuration for a basic SMTP proxy. An SMTP proxy in this sense is a simple
forwarding agent.
Note:
Lantronix does not support SMTP AUTH or any other authentication or encryption
for additional information.
To configure the SMTP network protocol:
1.
Select Protocol Stack on the menu bar.
2.
Select SMTP.
Figure 12-12 SMTP
3.
Modify the following settings:
MAC Address
Enter the MAC address to add to the ARP cache.
Table 12-13
SMTP Settings
Protocol Stack SMTP
Settings
Description
Relay Address
Address of all outbound email messages through a mail server.
Can contain either a hostname or an IP address.
Remote Port
Port utilized for the delivery of outbound email messages.
Table 12-11
ARP Settings
Protocol Stack
ARP Settings (continued)
Description