Lantronix XPORT PROTM 900-560 - Manual (Page 79)

9: Service Settings
XPort Pro User Guide 79
Figure 9-17 RSS
2. Enter or modify the following settings:
Table 9-18 RSS
3. Select Submit.
4. In the Current Status table, view and clear stored RSS Feed entries, as necessary.
LPD Settings
The XPort Pro device acts as a print server if a printer gets connected to one of its serial ports.
Selecting the Line Printer Daemon (LPD) link in the Main Menu displays the LPD web page. The
LPD web page has three sub-menus for viewing print queue statistics, changing print queue
configuration, and printing a test page. Because the LPD lines operate independently, you can
specify different configuration settings for each.
LPD Statistics
This read-only page shows various statistics about the LPD server.
To view LPD statistics for a specific LPD line:
5. Select LPD on the menu bar. The LPD web page appears.Select an LPD line at the top of the
page.Select Statistics. The LPD Statistics page for the selected LPD line appears.Repeat
above steps as desired, according to additional LPD(s) available on your product.
RSS Settings Description
RSS Feed Select On to enable RSS feeds to an RSS publisher.
Persistent Select On to enable the RSS feed to be written to a file (cfg_log.txt)
and to be available across reboots.
Max Entries Sets the maximum number of log entries. Only the last Max Entries
are cached and viewable.