Lantronix XPORT PROTM 900-560 - Manual (Page 26)

4: Configuration Using Web Manager
XPort Pro User Guide 26
line or a tunnel.
 In the middle of many pages, you can select or enter new configuration settings. Some
pages show status or statistics in this area rather than allow you to enter settings.
 At the bottom of most pages, the current configuration is displayed. In some cases, you
can reset or clear a setting.
 The information or help area shows information or instructions associated with the page.
 A Logout link is available at the upper right corner of every web page. In Chrome or
Safari, it is necessary to close out of the browser to logout. If necessary, reopen the
browser to log back in.
 The footer appears at the very bottom of the page. It contains copyright information and a
link to the Lantronix home page.
Navigating the Web Manager
The Web Manager provides an intuitive point-and-click interface. A menu bar on the left side of
each page provides links you can click to navigate from one page to another. Some pages are
read-only, while others let you change configuration settings.
Note: There may be times when you must reboot the XPort Pro for the new
configuration settings to take effect. The chapters that follow indicate when a change
requires a reboot.
Table 4-4 Summary of Web Manager Pages
Web Manager
Page Description See
Page
Status Shows product information and network, line, and tunneling
settings. 32
CLI Shows Command Line Interface (CLI) statistics and lets you
change the current CLI configuration settings. 128
CPM Shows information about the Configurable Pins Manager (CPM)
and how to set the configurable pins and pin groups to work with a
device. 59
Diagnostics Lets you perform various diagnostic procedures. 114
DNS Shows the current configuration of the DNS subsystem and the
DNS cache. 66
Email Shows email statistics and lets you clear the email log, configure
email settings, and send an email. 125
Filesystem Shows file system statistics and lets you browse the file system to
view a file, create a file or directory, upload files using HTTP, copy
a file, move a file, or perform TFTP actions. 103
FTP Shows statistics and lets you change the current configuration for
the File Transfer Protocol (FTP) server. 70
Host Lets you view and change settings for a host on the network. 57
HTTP Shows HyperText Transfer Protocol (HTTP) statistics and lets you
change the current configuration and authentication settings. 73