Line configuration, To configure a specific line, Figure 6-2 line 1 configuration – Lantronix XPORT PROTM 900-560 User Manual
Page 33
Advertising
6: Line and Tunnel Settings
XPort Pro User Guide
33
Line Configuration
This page shows the configuration settings for the serial line selected at the top of the page and
lets you change the settings for that serial line.
To configure a specific line:
1.
Select Line on the menu bar, if you are not already in the Line web page.
2.
Select a line number at the top of the page.
3.
Select Configuration. The Configuration page for the selected line appears.
Figure 6-2 Line 1 Configuration
Note:
The Interface
option is only supported
in XPort Pro, EDS4100,
EDS1100 and
EDS2100.
Advertising