Lantronix XPORT PROTM 900-560 - Manual (Page 110)

12: Maintenance and Diagnostics Settings
XPort Pro User Guide 110
ARP Settings
To configure the ARP network protocol:
1. Select Protocol Stack on the menu bar.
2. Select ARP.
Figure 12-10 ARP Protocol Page
3. Modify the following settings:
Table 12-11 ARP Settings
Protocol Stack
ARP Settings Description
ARP Timeout This is the maximum duration an address remains in the cache.
Enter the time, in hours , minutes and seconds .
IP Address Enter the IP address to add to the ARP cache.