Lantronix XPORT PROTM 900-560 - Manual (Page 81)

9: Service Settings
XPort Pro User Guide 81
Table 9-21 LPD Configuration
8. Click Submit. Repeat above steps as desired, according to additional LPD lines available on
your product.
LPD Configuration
Settings Description
Banner Select Enabled to print the banner even if the print job does not specify to do so. Selected
by default.
Binary Select Enabled for the device to pass the entire file to the printer unchanged. Otherwise,
the device passes only valid ASCII and valid control characters to the printer. Valid control
characters include the tab, linefeed, formfeed, backspace, and newline characters. All
others are stripped. Disabled by default.
Start of Job Select Enabled to print a "start of job" string before sending the print data.
End of Job Select Enabled to send an "end of job" string.
Formfeed Select Enabled to force the printer to advance to the next page at the end of each print job.
Convert Newlines Select Enabled to convert single newlines and carriage returns to DOS-style line endings.
SOJ String If Start of Job (above) is enabled, enter the string to be sent to the printer at the beginning
of a print job. The limit is 100 characters.
Indicate whether the string is in text or binary format.
EOJ String If End of Job (above) is enabled, enter the string to send at the end of a print job. The limit
is 100 characters. Indicate whether the string is in text or binary format.
Queue Name To change the name of the print queue, enter a new name. The name cannot have white
space in it and is limited to 31 characters. The default is LPDQueueX (for line number X)