Network 1 (eth0) interface configuration, To view and configure network interface settings – Lantronix XPORT PROTM 900-560 User Manual
Page 29
Advertising
5: Network Settings
XPort Pro User Guide
29
Network 1 (eth0) Interface Configuration
This page shows the configuration settings for the Ethernet connection and lets you change these
settings.
To view and configure network interface settings:
1.
Click Network 1 > Interface > Configuration at the top of the page. The Network 1 (eth0)
Interface Configuration page appears.
Figure 5-2 Network 1 (eth0) Interface Configuration
2.
Enter or modify the following settings:
Advertising