Lantronix XPORT PROTM 900-560 - Manual (Page 60)

8: Configurable Pin Manager
XPort Pro User Guide 60
Rules for configuring a CP are as follows. A CP:
 Can be in any number of groups.
 Can be only in one active group. Two groups with the same CP cannot be enabled at the
same time.
 Becomes locked and is not configurable if it is in an enabled group. Disable the group to
change the CP configuration.
When you are ready to permanently configure the CPs, use the CPM Groups web page. See
CPM: Groups on page 62 .
View CPs
1. Select CPM on the menu bar and then CPs at the top of the page. The CPM: CPs page
appears.
Figure 8-1 CPM: CPs
The Current Configuration table shows the current settings for each CP.
Table 8-2 CPM CPs Current Configuration
CPM – CPs Current
Configuration Description
CP Indicates the configurable pin number.