Lantronix XPORT PROTM 900-560 User Manual
Page 27
4: Configuration Using Web Manager
XPort Pro User Guide
27
IP Address Filter
Lets you specify all the IP addresses and subnets that are allowed
to send data to this device.
Line
Shows statistics and lets you change the current configuration and
Command mode settings of a serial line.
LPD
Shows LPD (Line Printer Daemon) Queue statistics and lets you
configure the LPD and print a test page.
Modbus
Shows the current connection status of the Modbus servers
listening on the TCP ports and lets you configure the Modbus
settings.
Network
Shows status and lets you configure the network interface.
PPP
Lets you configure a network link using Point-to-Point Protocol
(PPP) over a serial line.
Protocol Stack
Lets you perform lower level network stack-specific activities.
Query Port
Lets you change configuration settings for the query port.
RSS
Lets you change current Really Simple Syndication (RSS)
settings.
SNMP
Lets you change the current Simple Network Management
Protocol (SNMP) configuration settings.
SSH
Lets you change the configuration settings for SSH server host
keys, SSH server authorized users, SSH client known hosts, and
SSH client users.
SSL
Lets you upload an existing certificate or create a new self-signed
certificate.
Syslog
Lets you specify the severity of events to log and the server and
ports to which the syslog should be sent.
System
Lets you reboot device, restore factory defaults, upload new
firmware, and change the device long and short names.
Terminal
Lets you change current settings for a terminal.
TFTP
Shows statistics and lets you change the current configuration for
the Trivial File Transfer Protocol (TFTP) server.
Tunnel
Lets you change the current configuration settings for a tunnel.
VIP
Lets you configure Virtual IP addresses to be used in Tunnel
Accept Mode and Tunnel Connect Mode.
XML
Lets you export XML configuration and status records, and import
XML configuration records.
Web Manager Page
(continued)
Description
See
Page