Tunnel – statistics, To display statistics for a specific tunnel – Lantronix XPORT PROTM 900-560 User Manual
Page 37
6: Line and Tunnel Settings
XPort Pro User Guide
37
When any character comes in through the serial port, it gets copied to both the Connect Mode
connection and the Accept Mode connection (if both are active).
View statistics and configure a specific tunnel by using the Tunnel web page. When you select
Tunnel from the Main Menu, tunnels available for your product will display. Select a specific tunnel
to configure.
The following sub-menus listed may be used to configure a specific tunnel:
The following sections describe the steps to view and configure specific tunnel number settings.
These instructions also apply to additional tunnel menu options.
Tunnel – Statistics
Displays statistics for the specific tunnel. For example, Completed Accepts, Completed Connects,
Disconnects, Dropped Accepts, Dropped Connects, etc. The XPort Pro logs statistics for
tunneling. The Dropped statistic shows connections ended by the remote location. The
Disconnects statistic shows connections ended by the XPort Pro.
To display statistics for a specific tunnel:
1.
Select Tunnel on the menu bar. The Tunnel web page appears.
2.
Select a tunnel number at the top of the page.
3.
Select Statistics. The Tunnel Statistics page for the specific tunnel appears.
If a particular tunnel is connected, the following becomes available:
Identifying information about the tunnel connection (i.e., “Connect 1 Counters”)
Address of connection (i.e., “local:10001 -> 172.22.22.22.10001”)
Kill Connection(s) link: Click this link to terminate this active tunnel connection, as
desired.
Octets forwarded from Serial
Octets forwarded form Network
Uptime